Home » HVLP Brands » Husky

When you have a challenging painting or staining job that you need to do, why not make it as professionally well done as possible. Also why not make it easier for you as well. If you are a DIY person the Husky HVLP & Standard Gravity feed spray gun kit would make your whole home project much easier to do. A job well done and to do it easier, a very attractive combination.

In looking at the sprayer gun from Husky there are many advantages to obtain by using this kit. Let’s take a closer look at the kit itself.

Husky HVLP Spray Gun Kit

This kit is a popular choice for car refurbishing painting duties as well as staining fences and decks. Some people like to use to apply primers to walls in garages and other rooms in your house. Basically thinner lower viscosity paints and stains.

Latex finish type paints are too heavy (thick) to be used. They will gum up the spray gun tips and inner works. Please be aware of and always abide by manufacturer viscosity recommended specifications.

One more serious note when using is that when you are done please clean thoroughly as you do not want your spray guns to turn into a one time use piece of equipment.

What’s in the Kit

The kit comes with the following items…

It comes with two paint cups. The sizes are 120cc and 600cc. Here is the conversion for those measurements:

  • 120cc paint cup equals 4.05 ounces
  • 600cc paint cup equals 20.2884 ounces

Kit case dimensions are 16.9 x 15.9 x 5.4 inches. It weighs 10 lbs total.
Fan size: 1.2″ to 9.2″
Air Inlet Size: 0.25″
Average air consumption @ recommended operating pressure (CFM) is 40 psi

Kit comes with 1.4mm and 1.4mm HVLP nozzles but to get 1.8mm nozzle, cap, and needle you have to call husky tools at 1-888-43-HUSKY to order these parts from them. They are an additional purchase.

An inline air pressure regulator is also present in the kit.

Pros to Purchase

  • All Husky hand tools have a lifetime warranty
  • Features all stainless steel needles
  • Uses precision air caps for reliability and perfect paint atomization
  • The controls are located at the rear of the gun to allow comfortable use to both left and right hand operators
  • Precision spray cap for perfect pattern
  • This kit features both a conventional and HVLP spray gun
  • Both 600 cc and 120 cc paint cups are provided
  • Easy to clean
  • Comes complete with a cleaning brush set and multi wrench

Cons To Purchase

You can’t connect the unit to a paint can/bucket in any way. The gun is NOT an airless or pump-type spray gun, so you will need to pour the paint or stain through a strainer into the loading canister. You will not be able to just hook the gun up to a can of paint or a container of paint or stain.

The sprayer is made more for thinner paints like and stains. Also very good for use with clear coat and enamel paints such as automotive paints.

These guns are not suitable for use with Latex. Husky tools are manufactured today both in Taiwan and China.

Additional specs for this kit

  • Air Inlet Size: 0.25″
  • Fan Size 1.2 to 9.2″
  • Product Width: 17″
  • Product Depth: 16.73″
  • Product Length 5.5″
  • Product Height: 16″
  • Tip Size: 1.4mm
  • Number of Spray Settings: 30
  • Air Pressure at Paint Cap PSI: 25 & 50
  • Paint Cup Size: 200cc & 600cc

Warranty/Customer service

2 Year Manufacturer Warranty – If within two years from the date of purchase this Husky air tool product fails due to a defect in materials or workmanship, please immediately contact customer support to resolve the problem.

Customer Service Team at 1-888-43-HUSKY

8 a.m. – 6 p.m., EST, Monday-Friday, except normal holidays.

Warranty / Certifications: Do not return the air tool to the store. Please be prepared to send the product, postage prepaid, to the address provided by the Customer Service Team. The package must also include a copy of the dated first owner purchase receipt with the air tool model included and circled. The serial number and month/year of manufacture of the air tool must also be included to determine warranty.

A defective product will be promptly replaced with a new one of equal or greater value. This warranty excludes incidental/consequential damages and failures due to misuse, abuse or normal wear and tear. This warranty gives you specific rights, and you may also have other rights, which vary, from state to state.

A Brief History of Husky

Here is a brief history of Husky tools, where they have come from and why they are a player in today’s top choices for HVLP spayers.

Husky is a line of hand tools, pneumatic tools, and tool storage products. Husky tools were founded in 1924 in the State of Wisconsin. Husky Wrench was what they were called and by 1928 they were picked up to be distributed by J.H. Williams Tool Group.

Then from 1928 until the 1970s they were bought and traded a series of times to be owned by Litton Industries in the 1970s. Litton eventually sold Husky off to National Hand Tool.

Stanley Works acquired Husky from National Tool in 1986 and then in 1992 began supplying the Husky brand exclusively to The Home Depot. Later the name rights were to become property of Home Depot. Now Husky tools are manufactured and distributed for sale to the public by Home Depot.

Today Husky is known by it’s slogan, “The toughest name in tools.” With that in mind the Husky HVLP Spray gun comes highly recommended by the owners. A study of reviews will point out the over all high marks this kit gets.

What We Think

After seeing the details of this kit, and examining the Pros and Cons they will lead you to naturally have a need to make this a member of your tools.

Then when you see the warranty as well as the long history of the company you can rest assured that this would be a great choice for you if you have these type of DYI projects to do.

Take a look here to get your own Husky HVLP Paint Sprayer Kit.